Events

Event Programme of the Metalloobrabotka 2015 International Exhibition

Layout of convention facilities at Expocentre Fairgrounds

Layout of exhibition pavilions and halls at Expocentre Fairgrounds

Events for CEOs and top managers (obligatory preliminary registration, participation by agreement with the organizers)
Events for industry professionals
Events for marketing professionals

25 May

Official Opening Ceremony

Location: Pavilion No.2, Blue Hall, entrance between Pavilions No.2 and No.3
Time: 12.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

26 May

5th International Scientific and Technical Forum on Modern Trends in Technologies and Design of Metalworking Equipment

Organized by Stankoinstrument Association
Assisted by Expocentre ZAO

Contact:
Tel.: +7 (495) 650-59-21
E-mail: expo@stankoinstrument.ru

Venue: Pavilion No.7, Conference Hall
Time: 10.3016.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Final round and award ceremony for the winners in the Open Competition "CAD Design in Machine Building"

Assignment:

  1.  Announcement
  2.  Media file

Organized by the Pavlov Polytechnic College No.8
Supported by Stankoinstrument Association, Expocentre ZAO

Competition sponsored by

  • Ascon
  • Russian Engineering Union
  • CONMET
  • 3DCONNEXION
  • VolumeTechnologies

Contact:
Tel.: +7 (909) 687-00-62
E-mail: pkn8@mail.ru

Venue: Pavilion No.1, Entrance A, Floor 2
From: 11.3016.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Seminar on Innovative Ingersoll Cutting Tools for Railway Industry: Machining of Tongue and Rails, Profiles of Rails and Gear Wheels

Organized by Ingersoll Cutting Tools Russia

Contact:
Demchuk Vitaliy
Tel.: +7 (495) 745-27-50
E-mail: demchuk@ingersoll-imc.ru

Location: Pavilion No.7, Seminar Hall, Floor 2
Time: 10.3011.30

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Seminar "Tebis is the process!"

Organized by Tebis AG

Contact:
Vladimir Yushkevich
Tel.: +49 172 899 91 39
E-mail: vladimir.yushkevich@tebis.com

Location: Pavilion No.7, Seminar Room, Floor 2
Time: 11.3012.30

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Conference "Products and system solutions for machinery tools and metalworking"

Organized by : Bosch Rexroth

Conference program:

14.00-14.10: Introduction. Bosch Rexroth presentation. Structure in Russia, opportunities.
14.10-14.20: System solutions for the machinery tools. Overview.
14.20-14.30: Linear technology: new products and solutions. RSHP, BSHP, IMS-I, Ball and planetary screw assembly
14.30-14.50: News in hydraulics for machinery tools applications: Sytronix, CPM-MT, Q-Pack
14.50-15.10: Servodrives and motors IndraDrive
15.10-15.30: Bosch Rexroth CNCs: overview and the new features.
15.30-15.50: Products and system solutions for presses. Overview of projects.
15.50-16.00: Round table. Discussion

Contact: Maksim Sonnych
Tel.: +7 495 560 96 35
Fax: +7 495 560 99 97
E-mail: Maksim.Sonnych@boschrexroth.ru, fa@boschrexroth.ru
www.boschrexroth.ru

Location: Pavilion No.7, Seminar Room, Floor 2
Time: 11.30-12.30

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Seminar on Modern Methods of Machining of Composite Materials

Organized by: Iscar

Lecturer: Michael Kotlyar, Team Leader of Solid Carbide & HSS End Mills (Israel)

Contact: Irina Gorodentseva
Tel.: +7 (499) 660 91 25
E-mail: gorodentseva@iscar.ru

Location: Panoramic Hall
Time: 11.00-13.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Presentation on modern Russian import substitution solutions in the field of programming CNC machines

Organized by ADEM Group

Contact: Daniil Zinchenko
Tel.: +7 (919) 101-30-86
E-mail zinchenko@adem.ru

Venue: Pavilion No.7, Conference Hall 6
Time: 15.0016.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

27 May

Technical seminar on the supply of associated parts and jigs for CNC turning, milling and boring machines

Organized by Ivtexservis OOO (Ivanovo, Russia)
Officially supported by the Stankoinstrument Association
Assisted by Expocentre ZAO

Location: Pavilion No.2, Seminar Hall No.4
Time: 27 May 2015, 10.30-12.00

Program

  1. Opening speech by General Director N.E. Alyakritskiy about the main production activities of Ivtexservis OOO
    Machine tool units: toll storage magazines, benches, manipulators, holding cylinders, technical characteristics, advantages of the Pragati company
    Speaker: N.E. Alyakritskiy, General Director, 10 min
  2. Auxiliary tools: cutter holders, toll discs, grip sockets, structural designs, technical characteruistics, advantages of the Pragati company
    Speaker: A.V. Shumarin, Technical Director, 50 min
  3. Features of installation, commissioning and start-up of associated parts and jigs of the Pragati company
    Speaker: V.B. Kochin, Spare Parts Manager, 30 min

Contacts:
Vladimir Kochin
Andrey Ivanov

Tel.:+7 (910) 667-56-86, +7 (910) 669-63-51
E-mail: kvb@ivtexservis.ru, ivanov@ivtexservis.ru

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

International Forum on Digital Machinery Production: Challenges and Opportunities 2015
DAY ONE

The Forum aims are to expand and strengthen international and interregional cooperation, join efforts of researches and businessmen to develop digital technologies for machinery manufacturing, and spotlight innovation projects for efficient digital machinery production.

Organized by Moscow State University of Technology STANKIN, Expocentre ZAO
Location: Pavilion No. 1, Hall D1 (Entrance D, Floor 3)

Admission by preliminary registration at the Forum Organizing Committee (please send your application to nmp.metobr@gmail.com)

Contact:
Yevgeniya Lukashevich
Tel.: +7 (499) 973-39-21
E-mail: lukashevich.ev@gmail.com

Official award ceremony for the winners in the All-Russian competition among students for the Best Innovation Project in the Metalworking Industry

Organized by Moscow State University of Technology STANKIN, supported by Expocentre ZAO

Location: Pavilion No. 1, Hall D1 (Entrance D, Floor 3)
Time: 14.15-15.00

Contact:
Yevgeniya Lukashevich
Tel.::+7 (499) 973-39-21
E-mail:
bestproject.metobr@gmail.com
lukashevich.ev@gmail.com

Admission by exhibitor and visitor badges.

Get e-ticket to the exhibition

Conference on Key Trends in Metalworking Specialist Training

Organized by : Didactic Systems ZAO Assisted by Stankoinstrument Association, Expocentre ZAO

Contact::
Tel.: +7 (495) 650-59-21
E-mail: expo@stankoinstrument.ru

Location: Pavilion No.8, Ground Level, Buffet Hall
Time: 10.3012.30

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Subcontracting Exchange

Organized by
National Partnership of Subcontracting Development
Chamber of Commerce and Industry of Yaroslavl Oblast
Supported by
Chamber of Commerce and Industry of the Russian Federation
Expocentre ZAO
Stankoinstrument Association

Obligatory preliminary registration by the Yaroslavl Centre of Production Cooperation and Subcontracting, http://subcontract.ru/Tender/default.html

Contact:
Tel.: +7 (4852) 32-80-53, 21-91-93, 21-98-61
E-mail: tpp@yartpp.ru, info@subcontract.ru

Location: Pavilion No.1, Floor 2, Entrance A, then take an elevator up to Floor 2
Time: 10.0017.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

3rd All-Russian Forum Metalloobrabotka: Strategy 2015-2017

The development strategy of Russian metal industry during the crisis and the difficult international situation

  Information about the Forum

Organized by Congress-Exhibition Company IMPERIA with the support of Expocenter and Stankoinstrument Association

Contact:
Tel.: +7 (495) 730-79-06; (812) 327-49-18
E-mail: imperia@imperiafoum.ru

Location: Congress centre, Press Hall, Floor 2
Time: 10.0018.00

Project manager: Ruslan Ahmetzyanov

Admission by preliminary registration in Forum Organizational Committee

Get your e-invitation to the exhibition

3rd Metalforming Symposium Russia

Organized by Hatebur with the support Ferrostaal

Contact:
Maslowa Nadeshda
Tel.: +7 (495)-258-36-76, ext. 114
E-mail: nadeshda.maslowa@ferrostaal.com

Location: Pavilion No.7, Floor 2, Seminar Hall
Time: 12:00 22:30

Participants of the symposium need to fill out the registration form on the website www.hatebur.com at least 3 days in advance.

Get your e-invitation to the exhibition

Seminar on Design of High-Performance Ingersoll Cutting Tools and Their Advantages for Use at Shipbuilding Plants. Machining of Ship Engine Parts

Organized by Ingersoll Cutting Tools Russia
Time: 12.3014.00

Contact:
Demchuk Vitaliy
Tel.: +7 (495)745-27-50
E-mail: demchuk@ingersoll-imc.ru

Location: Pavilion No.7, Floor 2, Seminar Hall
Time: 10.3011.30

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Seminar on Modern Methods of Turning. Solutions to Increase Productivity

Organized by: Iscar

Lecturer: Dmitri Goncharov, Lead Application Engineer, ISO Turning Team (Israel)

Contact: Irina Gorodentseva
Tel.: +7 (499) 660 91 25
E-mail: : gorodentseva@iscar.ru

Location: Panoramic Hall
Time: 11.00-13.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

28 May

International Forum on Digital Machinery Production: Challenges and Opportunities 2015
DAY TWO

The Forum aims are to expand and strengthen international and interregional cooperation, join efforts of researches and businessmen to develop digital technologies for machinery manufacturing, and spotlight innovation projects for efficient digital machinery production.

Organized by Moscow State University of Technology STANKIN, Expocentre ZAO
Location: Pavilion No. 1, Hall D2 (Entrance D, Floor 3)

Admission by preliminary registration at the Forum Organizing Committee (please send your application to nmp.metobr@gmail.com)

Contact
Yevgeniya Lukashevich
Tel.: +7 (499) 973-39-21
E-mail: lukashevich.ev@gmail.com

The technical workshop Madaula Driven tooling systems for CNC machine - maximum opportunities for your production

Organized by OOO Intehnika (exclusive representative of MADAULA S.A. products)

Contact:
Kosyrev Vitaly
Tel.: +7 (495) 560-48-88, 560-49-99;
E-mail: info@intehnika.ru

Location: Pavilion No.2, Seminar Hall No.2, Floor 4
Time: 10.3013.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Seminar MAZAK multitasking machines with newest intelligent CNC

Organized by MAZAK, Japan 

Contact:
Olga Babunova
Tel.: +7 (495) 210-89-89
E-mail: olga.babunova@mazak.ru

Location: Congress Centre, Skylight hall, Floor 2
Time: 14.0015.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition

Seminar on SpinJet Unique Solutions to Increase Efficiency of Machining with Small Diameter Tools

Organized by: Iscar

Lecturer: Alex Grouzer, Head of Development Department (Israel)

Contact: Irina Gorodentseva
Tel.: +7 (499) 660-91-25
E-mail: gorodentseva@iscar.ru

Location: Panoramic Hall
Time: 11.00-13.00

Admission by exhibitor and visitor badges

Get your e-invitation to the exhibition